If the three methods above don’t work, you should perform a factory reset to your printer. Step 3: Open the folder where you have downloaded firmware, and then open the firmware file to install the latest firmware. Step 2: Expand the Firmware category on the printer’s software page and click Download to save the firmware to a folder. Step 1: Click Printers, enter the required model number and press the Submit button. In this case, you should go to the Software and Driver Downloads page for HP printers. Sometimes, if your HP printer does not have the latest HP firmware, it may trigger the HP missing or failed printhead error. Step 5: Connect the unplugged power cord to the receptacle on the back of the printer, and turn on your printer.Īfter finishing the steps above, if you can still see the error message on the printers’ control panel, please go to the next method.

Note: Before closing the cartridge access door, remember to put the printer’s carriage latch down. Step 4: Place your printhead firmly in the carriage to fully set it up. Step 3: Drag the Printhead only a bit not completely out of the carriage. Step 2: Pull up on the latch on the right part of the printer carriage. Step 1: Unplug the power cord from the back of your printer. Method 2: Reseat Printhead of HP Printerīesides, you can fix the HP missing or failed printhead error by trying to reseat the printhead of your printer. Step 3: Wait for at least 1-2 minutes and then connect all the cables with your printer.Īfter that, you can check if the HP printheads problem is resolved. Step 2: Disconnect the power cord from the printer as well as your wall outlet. Step 1: Turn on your HP printer and let the printer be in the ideal and silent mode.

To fix the HP missing or failed printhead error, the simplest and easiest way is to reset your HP printer. Luckily, this post is going to tell you how to fix the HP missing or failed printhead error. If you encountered the missing or failed printhead error on your HP printers, you could not print anything. Method 2: Reseat Printhead of HP Printer.

Some HP users may encounter the missing or failed printhead error with the description of “The printhead appears to be missing, not detected, or incorrectly installed.” How do I fix a missing or failed printhead? Well, this post from MiniTool Partition Wizard will offer you several solutions to fix this error.

Install printhead hp officejet pro 8610